The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Merry Christmas! (FOUND IT!!!)

posted by  bill d cat on  Fri Dec 24 09:28 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Aug 11 04:23 CST 2014
[RELATED]

It's Publication no. MA 9172303 Oct -97

Maybe you can score one from Volvo Sweden with the illustrations. The RHD bars are different, with an extra kink in the main bar. I imagine the torque specs are the same.

Volvo Car Corporation
Technical Service
Dept 91410, SAA2
405 08 Goteborg
Sweden

Telefax +46 31 594379


-------------------------------------------------------------------------------
1 Applies to left hand drive cars equipped with an alarm

-Bend the siren bracket down approximately 20mm (3/4")

-------------------------------------------------------------------------------

2. -Remove the nuts and washers (1) which secure the spring nut mountings to the bodywork.

-Lift the bracket (2) and move the fuses to one side.

-------------------------------------------------------------------------------

3. -Install the brackets (1) on the stay with the screws from the kit.

-Install nuts (2) without tightening.

-------------------------------------------------------------------------------

4. -Install the stay (1) on the spring nut mountings.
-Reinstall bracket for the fuses as far from the stay as possible.
-Reinstall washers.
-Center the stay brackets and install nuts (2) from the kit, tighten to 25Nm (19 ft. lbf.)
-Tighten nuts to 40Nm (30 ft.lbf.), see P3.
-Post-tighten all screws and nuts after approximately 2 500 mil (9 000 miles)





USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.