The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

intercooler freezing 850

posted by  someone claiming to be Chuck on  Tue Jan 25 03:53 CST 2005 [RELATED]

What I did was to disconnect the rubber hose from the metal s shaped pipe that runs from the turbo and over the top of the engine. This rubber hose goes to the bottom of the intercooler. I then disconnected and removed the plastic hose that comes from the top of the intercooler and goes to the TB rubber hose. I had to cut the metal s shaped pipe that comes from the turbo ( aluminium). I tried to find the best section to cut it so that I would be able to rejoin it in the spring with a small section of rubber hose. From the cut section of metal pipe I ran a spring reinforced ( radiator hose) down to a nylon right angle plumbing fitting and into the TB hose. I will have to look to see what all of the hose and fitting diameters are. If you put your e mail on this brickboard I can send you a picture of the finished job.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.