Removing the dashboard environment panel
1.
Carefully install weatherstrip tool between the dashboard and the bottom edge of the panel.
Pull the bottom edge of the panel outwards.
2.
Press the panel up slightly.
Carefully pull the upper edge of the panel outwards.
Remove the panel.

Removing the radio panel
Make a note of the radio code.
Press in the catches to release them.
Grip the catches. Pull the radio out.
Disconnect the connector.
If required: Remove the compartment from the center console.

Twist the dashboard environment panel downwards.
Remove:
-the connector (GR)
-the air hose.

Remove the three bulb holders on the reverse by the connector by turning the holders a quarter of a turn using a screwdriver.
Press out the bulb holder and the bulb.