I used the voltmeter and here are my findings
3 wires, 1 ground totaling to four wires total.
Switch off (light off)
1 wire gives 12v
2 wires give nothing
1 ground
Switch on (light on)
2 wires gives 12v
1 wire give nothing
1 ground
I assume it's operating correctly. Sorry, I don't quite remember colors but if it's pertinent I'll retry. Motors still don't work, I'm thinking the motors are indeed dead.
They are harder to open than I thought so I haven't gotten a chance to try and reset their position.
My indy said that they've found these motors functioning with the little damper arm off or completely stripped so I don't think they do have a position switch as they operate without the arm on them offering resistance or anything.
Cheers
-Hector
--
-Hector
|