Volvo AWD S70 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 2/2018 S70 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Turbo Intercooler Tubing Clamp Slides Off S70 1998

posted by  KlausC on  Sat Feb 21 07:04 CST 2009
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 10:15 CST 2014
[RELATED]

Times like this I miss having my R as a reference.
The soft part of the piping needs stick out past the clamp by at least 1/4 inch. If you haven't already, unscrew the clamp that holds the piping above the engine cover to give you a small amount of wiggle room. Slide the hard pipe about 1/2 inch into the flex pipe and tighten the clamp, hard.
Then go back and reposition the hold down clamp over the valve cover.

--
My name is Klaus and I am a Volvoholic.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Turbo Intercooler Tubing Clamp Slides Off [S70][1998]
posted by  Bill1959 subscriber  on Sun Feb 15 15:13 CST 2009 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.