Volvo AWD 850 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 8/2004 850 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Glove box fix 850 1995

posted by  steelydev on  Wed Jun 17 11:09 CST 2009
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Jul 29 09:51 CST 2009
[RELATED]

I just fixed mine. It is basically as shown at matthewsvolvosite.

Carefully hacksaw the strike (U-shaped wire) that the latch hooks into.

Take the entire latch out of the door.

Look at how the mechanism operates. There is an oval piece that should have a round pin sticking out and that pin breaks off. Then it can no longer operate the latch.

What I did was measure the diameter of the pin (you can see the remains) and drill out where the pin attached. Then tap the hole for a machine screw. Using a tread locking compound, screw in the machine screw until it stick out far enough to engage the latch.

You will have to buy a new strike. But you glove box will look as good as ever!






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Glove box fix [850][1995]
posted by  Mr. Detail  on Tue Jun 16 06:46 CST 2009 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.