Volvo AWD 850 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 7/2004 850 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

ABS module removal is a piece of cake 850 1996

posted by  KlausC on  Sun Oct 20 11:14 CST 2013
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 10:15 CST 2014
[RELATED]

I tried unplugging the 2 wire connector first according to the pics on Matthews Volvo site, but that was too difficult. The large black cover rotated easily up and toward the passsenger side, unplugging itself from the ABS module. Then the 2 wire connector was easily lifted out.

The 4 E5 screws came off nicely with a 5/32 socket. While it was hard to 'feel' good contact, after a full turn it was only finger tight. Air cleaner stayed in place during the process, the heated air intake had already been permanantly removed.

So the module is ready to be packaged and sent to Mid-west ABS, Matty Moo is closer to me than Victor.

Thank you.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New ANSWERED ABS module removal [850][1996]
posted by  KlausC subscriber  on Sat Oct 19 10:30 CST 2013 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.