Volvo AWD Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 1/2005

[<<] [>>]

VIEW

REPLY TO THIS MESSAGE

SAVE

Best methods for cam locking when doing head gasket

posted by Chris Mullet on Mon Oct 13 15:04 CST 2014
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS]

[IGNORE ALL POSTS]

last visit: Fri Oct 24 09:08 CST 2014

[RELATED]

Note before taking the sprockets loose from the cam shafts - When the sprockets are on their timing marks, take a look at the aligning slots on the other ends of the shafts. You will see that they are parallel, but not on the same plane. What I mean is, I believe you will find the intake cam slot is slightly ABOVE center while the exhaust cam slot is slightly BELOW center. So if you fashion a locking tool, there needs to be a slight offset built in. You don't want to simply put the slots in line with each other. If you do, each cam will be retarded just a smidge. Or worse, you may get one of the cams 180 deg out of time. (Ouch!)

THREADED

THREADED EXPANDED

FLAT

PRINT ALL

MESSAGES IN THIS THREAD

Best methods for cam locking when doing head gasket
posted by andybbrown on Sun Oct 12 15:24 CST 2014 >

Best methods for cam locking when doing head gasket
posted by KlausC subscriber on Sun Oct 12 19:00 CST 2014 > V
- Best methods for cam locking when doing head gasket
  posted by andybbrown on Sun Oct 12 21:20 CST 2014 > V
  - Best methods for cam locking when doing head gasket
    posted by alschnertz subscriber on Mon Oct 13 06:44 CST 2014 > V
    - Best methods for cam locking when doing head gasket
      posted by andybbrown on Mon Oct 13 13:03 CST 2014 > V
      - Best methods for cam locking when doing head gasket
        posted by packard8 on Mon Oct 13 17:31 CST 2014 > V
      - Best methods for cam locking when doing head gasket
        posted by KlausC subscriber on Mon Oct 13 20:09 CST 2014 > V
      - Best methods for cam locking when doing head gasket
        posted by KlausC subscriber on Mon Oct 13 20:12 CST 2014 > V
        
        Best methods for cam locking when doing head gasket
        posted by andybbrown on Tue Oct 14 14:05 CST 2014 > V
        
        Best methods for cam locking when doing head gasket
        posted by KlausC subscriber on Tue Oct 14 14:45 CST 2014 > V
        
        HEad nearly off
        posted by andybbrown on Wed Oct 15 02:43 CST 2014 > V
        
        Head nearly off
        posted by KlausC subscriber on Wed Oct 15 09:21 CST 2014 > V
        
        Head nearly off
        posted by andybbrown on Wed Oct 15 18:12 CST 2014 > V
        
        Head nearly off
        posted by KlausC subscriber on Wed Oct 15 18:24 CST 2014 > V
        
        Head nearly off
        posted by andybbrown on Wed Oct 15 18:33 CST 2014 > V
        
        Head nearly off
        posted by KlausC subscriber on Wed Oct 15 19:47 CST 2014 > V
        
        Head nearly off
        posted by andybbrown on Wed Oct 15 19:55 CST 2014 > V
        
        Head nearly off
        posted by KlausC subscriber on Wed Oct 15 20:23 CST 2014 > V
        
        photos of burned cylinder and valves may disturb
        posted by andybbrown on Wed Oct 15 23:01 CST 2014 > V
        
        and the valves photo
        posted by andybbrown on Wed Oct 15 23:04 CST 2014 > V
        
        gasket
        posted by andybbrown on Wed Oct 15 23:13 CST 2014 > V
        
        gasket
        posted by KlausC subscriber on Thu Oct 16 09:15 CST 2014 > V
        
        gasket
        posted by andybbrown on Thu Oct 16 11:26 CST 2014 > V
        
        gasket
        posted by KlausC subscriber on Thu Oct 16 12:20 CST 2014 > V
        
        gasket
        posted by andybbrown on Fri Oct 24 05:07 CST 2014 > V
        
        gasket
        posted by KlausC subscriber on Fri Oct 24 10:27 CST 2014 > V
    - Sad picks
      posted by KlausC subscriber on Thu Oct 16 09:20 CST 2014 > V
  - Best methods for cam locking when doing head gasket
    posted by KlausC subscriber on Mon Oct 13 10:06 CST 2014 > V

Best methods for cam locking when doing head gasket
posted by riverbend subscriber on Mon Oct 13 06:36 CST 2014 > V
- Best methods for cam locking when doing head gasket
  posted by alschnertz subscriber on Mon Oct 13 09:02 CST 2014 > V
  - Best methods for cam locking when doing head gasket
    posted by andybbrown on Mon Oct 13 12:40 CST 2014 > V
    - Best methods for cam locking when doing head gasket
      posted by Chris Mullet subscriber on Mon Oct 13 15:04 CST 2014 > V
      - Camshaft cover cap won't come out
        posted by andybbrown on Mon Oct 13 16:18 CST 2014 > V
        
        Camshaft cover cap won't come out
        posted by alschnertz subscriber on Mon Oct 13 16:25 CST 2014 > V
        
        Can't align shafts - Photo
        posted by andybbrown on Mon Oct 13 17:27 CST 2014 > V
        
        Can't align shafts - Photo
        posted by alschnertz subscriber on Mon Oct 13 18:20 CST 2014 > V
        
        Can't align shafts - Photo
        posted by KlausC subscriber on Mon Oct 13 20:01 CST 2014 > V
        
        homemade camlock and photo
        posted by andybbrown on Mon Oct 13 21:02 CST 2014 > V
        
        homemade camlock and photo
        posted by KlausC subscriber on Mon Oct 13 21:48 CST 2014 > V
  - Best methods for cam locking when doing head gasket
    posted by riverbend subscriber on Mon Oct 13 20:07 CST 2014 > V

<< < > >>

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.

Volvo AWD Forum Index

Community Forums:

RWD

AWD

GATHERINGS

OPINIONS

PICKNPULL

V8

STORIES

Classifieds

Site Features

RWD Series/Models

AWD Series/Models

Volvo AWD Forum

Best methods for cam locking when doing head gasket