Volvo AWD Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 10/2014

[<<] [>>]

VIEW

REPLY TO THIS MESSAGE

SAVE

gasket

posted by KlausC on Thu Oct 16 09:15 CST 2014
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS]

[IGNORE ALL POSTS]

last visit: Fri Oct 24 10:15 CST 2014

[RELATED]

I have seen engine blocks in breaker yards looking better than this one. Sad to say, but it appears to be burned toast. A used engine is all this car needs, but the cost may be too high for a 1998. What a shame!

Time for a few beers...

BTW, if you don't need AWD, don't bother getting one in your next family car. I have come to the realization and age that if I 'need' AWD, then I shouldn't be on the road anyway. Let the road crews plow the roads before I get out there. Traction control and ABS should be enough for most of us.
--
My back feels better when I sit in a Volvo seat

THREADED

THREADED EXPANDED

FLAT

PRINT ALL

MESSAGES IN THIS THREAD

Best methods for cam locking when doing head gasket
posted by andybbrown on Sun Oct 12 15:24 CST 2014 >

Best methods for cam locking when doing head gasket
posted by KlausC subscriber on Sun Oct 12 19:00 CST 2014 > V
- Best methods for cam locking when doing head gasket
  posted by andybbrown on Sun Oct 12 21:20 CST 2014 > V
  - Best methods for cam locking when doing head gasket
    posted by alschnertz subscriber on Mon Oct 13 06:44 CST 2014 > V
    - Best methods for cam locking when doing head gasket
      posted by andybbrown on Mon Oct 13 13:03 CST 2014 > V
      - Best methods for cam locking when doing head gasket
        posted by packard8 on Mon Oct 13 17:31 CST 2014 > V
      - Best methods for cam locking when doing head gasket
        posted by KlausC subscriber on Mon Oct 13 20:09 CST 2014 > V
      - Best methods for cam locking when doing head gasket
        posted by KlausC subscriber on Mon Oct 13 20:12 CST 2014 > V
        
        Best methods for cam locking when doing head gasket
        posted by andybbrown on Tue Oct 14 14:05 CST 2014 > V
        
        Best methods for cam locking when doing head gasket
        posted by KlausC subscriber on Tue Oct 14 14:45 CST 2014 > V
        
        HEad nearly off
        posted by andybbrown on Wed Oct 15 02:43 CST 2014 > V
        
        Head nearly off
        posted by KlausC subscriber on Wed Oct 15 09:21 CST 2014 > V
        
        Head nearly off
        posted by andybbrown on Wed Oct 15 18:12 CST 2014 > V
        
        Head nearly off
        posted by KlausC subscriber on Wed Oct 15 18:24 CST 2014 > V
        
        Head nearly off
        posted by andybbrown on Wed Oct 15 18:33 CST 2014 > V
        
        Head nearly off
        posted by KlausC subscriber on Wed Oct 15 19:47 CST 2014 > V
        
        Head nearly off
        posted by andybbrown on Wed Oct 15 19:55 CST 2014 > V
        
        Head nearly off
        posted by KlausC subscriber on Wed Oct 15 20:23 CST 2014 > V
        
        photos of burned cylinder and valves may disturb
        posted by andybbrown on Wed Oct 15 23:01 CST 2014 > V
        
        and the valves photo
        posted by andybbrown on Wed Oct 15 23:04 CST 2014 > V
        
        gasket
        posted by andybbrown on Wed Oct 15 23:13 CST 2014 > V
        
        gasket
        posted by KlausC subscriber on Thu Oct 16 09:15 CST 2014 > V
        
        gasket
        posted by andybbrown on Thu Oct 16 11:26 CST 2014 > V
        
        gasket
        posted by KlausC subscriber on Thu Oct 16 12:20 CST 2014 > V
        
        gasket
        posted by andybbrown on Fri Oct 24 05:07 CST 2014 > V
        
        gasket
        posted by KlausC subscriber on Fri Oct 24 10:27 CST 2014 > V
    - Sad picks
      posted by KlausC subscriber on Thu Oct 16 09:20 CST 2014 > V
  - Best methods for cam locking when doing head gasket
    posted by KlausC subscriber on Mon Oct 13 10:06 CST 2014 > V

Best methods for cam locking when doing head gasket
posted by riverbend subscriber on Mon Oct 13 06:36 CST 2014 > V
- Best methods for cam locking when doing head gasket
  posted by alschnertz subscriber on Mon Oct 13 09:02 CST 2014 > V
  - Best methods for cam locking when doing head gasket
    posted by andybbrown on Mon Oct 13 12:40 CST 2014 > V
    - Best methods for cam locking when doing head gasket
      posted by Chris Mullet subscriber on Mon Oct 13 15:04 CST 2014 > V
      - Camshaft cover cap won't come out
        posted by andybbrown on Mon Oct 13 16:18 CST 2014 > V
        
        Camshaft cover cap won't come out
        posted by alschnertz subscriber on Mon Oct 13 16:25 CST 2014 > V
        
        Can't align shafts - Photo
        posted by andybbrown on Mon Oct 13 17:27 CST 2014 > V
        
        Can't align shafts - Photo
        posted by alschnertz subscriber on Mon Oct 13 18:20 CST 2014 > V
        
        Can't align shafts - Photo
        posted by KlausC subscriber on Mon Oct 13 20:01 CST 2014 > V
        
        homemade camlock and photo
        posted by andybbrown on Mon Oct 13 21:02 CST 2014 > V
        
        homemade camlock and photo
        posted by KlausC subscriber on Mon Oct 13 21:48 CST 2014 > V
  - Best methods for cam locking when doing head gasket
    posted by riverbend subscriber on Mon Oct 13 20:07 CST 2014 > V

<< < > >>

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.

Volvo AWD Forum Index

Community Forums:

RWD

AWD

GATHERINGS

OPINIONS

PICKNPULL

V8

STORIES

Classifieds

Site Features

RWD Series/Models

AWD Series/Models

Volvo AWD Forum

gasket