Volvo AWD 850 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 12/2005 850 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Fog lights 850 1995

posted by  someone claiming to be yuri on  Thu Mar 28 18:00 CST 2002 [RELATED]

1st you don't need to drill anything - the oe lights should go where you have black "inserts" on ea side of the bumper.

2nd i installed them in the middle on the sides of the license plate and used screws that hold plastic bumper cover to mount the brackets that hold the lights so no drilling was needed.

3rd my 95 850glt did have the a single orange/green wire connector by the battery and it was hanging (there is another connector by the buttery that inserts into a dummy plug - i don't know what it for but it did not have proper voltage/ power)

4th my car needed relay switch and relay/switch harness that i had to modify since it had two relay holders and also installed a fuse there - the existing wiring on mine goes from under dash to the battery and that is it

WHEN YOU WORK UNDER DASH DO NOT PULL/TOCH ANY OTHER WIRES - I HAD LOSE TERMINAL THAT DEALER SAID i MIGHT HAVE DONE WHEN INSTALLING FOG LIGHTS






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Fog lights [850][1995]
posted by  someone claiming to be matty  on Mon Mar 25 09:19 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.