Volvo AWD Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 3/2019

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Any one tried heating up the bracket to replace top motor mount?

posted by  gdict on  Sun Nov 24 14:17 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

This is really easy. Knock the center out of the old bushing to give some clearance to work. Use a nice fresh hacksaw blade. Put the balde through the bushing then attach it it to your saw handle. I attached mine with the teeth UP, then proceeded to saw a groove through the bushings outer ring on the top side. Once you cut through the bushing, remove the blade from the saw and set aside. Use some good pliers or vise-grips to grap the bushing and just twist it out. The replacement poly bushing is a no brainer to install.

Have Fun!






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Any one tried heating up the bracket to replace top motor mount? [850][1995]
posted by  someone claiming to be Yuri  on Mon Nov 11 16:02 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.