Volvo AWD 850 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 11/2001 850 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Volvo 850 1996

posted by  Flying Dutchman on  Mon Feb 10 03:53 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

Thanks to the help of a friend, I did this myself.

The car must be put on a lift.
Engine subframe must be removed
Steering rack needs to be removed from subframe and subframe needs to be dropped.
Axles need to be removed from tranny.
Ball joints need to be disconnected.
Tranny needs to be pulled
Flywheel needs to be removed.
The remove seal/replace
Reinstall everything.

It took about 10 hours to do it. Part was $15. Dealer wanted $1,100. I have a 5 speed and did my clutch while I was in there and replaced the tranny fluid as well. Cost me just shy of $300 for all parts.

Just a word of advice, have your $10 a piece axle seals replaced while they're in there. Mine started leaking about a week after I did the main seal job.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Volvo [850][1996]
posted by  drc  on Fri Feb 7 13:01 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.