Volvo AWD V70-XC70 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 3/2018 V70-XC70 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

99 V70 Motor mount V70-XC70

posted by  someone claiming to be V70BASEBOY on  Mon Jun 28 05:43 CST 2004 [RELATED]

Hi Marty,

For ease of installation, the two-piece design that FCP sells is the way to go. IPD also carries a two-piece polyurethane version of the mount that will work in your particular application.

On my 98 V70 the setup is slightly different, and I decided to replace mine with the OEM design, and yes, it was a real PITA to press the new mount into place. If I had it to do over again, I would go the FCP or IPD route and deal with the possibility that I might notice a slight increase in vibration through the dash/steering wheel.. Some folks here and also at Volvospeed have experimented with both types and some can feel a variance in the vibration, but I have not hands on knowledge, as I stuck with OEM.

Whatever you decide to do, good luck and let us know how it goes.

Dave






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 99 V70 Motor mount [V70-XC70]
posted by  someone claiming to be Oleseahorse  on Sun Jun 27 10:28 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.