|
Blower fan on that thing is a walk in the park. You might be able to find a fag on it here or at Bay 13 but the basic gist of the deal is to remove the under dash panel, pull the glove box (really just so you can see what you are doing), pull the knee bolster and then pull the blower motor. Once you have the previoulsy mentioned stuff out of your way you will be able to see what it takes, I believe it is 4 torx head screws and pull a couple of connectors out of your way and the thing will damn near fall out on your foot. There is a mount piece for the knee bolster that will kind of get in your way and you will need to angle the motor in and out around the thing but it is no big deal. Are you going to replace the power stage as well or try just the fan to start?
Mark
|