Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 8/2004 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Valve cams not moving when cranking? 200 1979

posted by  someone claiming to be bulletproof on  Wed Mar 29 06:21 CST 2006 [RELATED]

Bruce; CJ;
Good points to be sure. I guess I don't consider the possibility of stripping threads or breaking studs because I've never had it happen in this procedure (until the next time I do it, probably). And I have removed the pulley this way on numerous occasions on both of the B21 engines I have owned/maintained. For me it's six of one, half a dozen of the other.
Plus, I'll bet you both a nickel that the v-belts need replacing and therefore an adjustment will probably be in order.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New The $25 auction brick that couldn't!!! [200][1979]
posted by  Spinnaker  on Tue Mar 28 07:09 CST 2006 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.