Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 1/2009 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Yes, I am an idiot. What the heck did I drill? (Water Pump 91 240) 200

posted by  DHartlein on  Sun Dec 3 04:53 CST 2006
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sat Aug 2 20:00 CST 2014
[RELATED]

I broke a bolt on the water pump. Thought I was drilling the right hole, and broke an extractor off. Just got under the car and saw I was drilling a hole just below the mount bolt hole - that is inside the gasket area of the pump.

Here are my questions:

- What the heck is this hole for?

- I drilled through it, thinking it was the broken bolt, using a 7/64 bit from Lowe's. The bit went through quickly and hit air, I think. IS THIS OKAY?

- Should the hole be open, or plugged?

The good news is I just got the bolt out. No need to tap or anything. Now I am worried I drilled into something bad in the block. Surely you can't get through cast iron that easily with a cheap hand drill and bit from Lowe's.

Thanks for the help folks!

Dave
91 240 Original owner if I don't kill it first.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 1 Yes, I am an idiot. What the heck did I drill? (Water Pump 91 240) [200]
posted by  DHartlein  on Sun Dec 3 04:53 CST 2006 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.