Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 4/2002 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

That one's my preference 200

posted by  Sven's Maintainer on  Thu Mar 15 13:18 CST 2007
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Sep 16 20:44 CST 2012
[RELATED]


That one's my preference.
That is, use a slightly longer bolt to move p/s pump forward, and run it off pulley originally used for a/c compressor.

Use a hardened bolt. It will take lots of stress where it protrudes forward off the bracket. Put in fresh p/s mount bushings for that same reason, maybe poly ones. I think an easy-to-find 5/8" bolt will fit but don't quote me.
--
Sven: '89 245 NA, 951 ECU, open-front airbox, E-fan, 205/65-15's, IPD sways, E-Codes, amber front corner reflectors, quad horns. Wifemobile '89 245 NA stock. 90 244 NA spare, runs.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Bypassing AC Compressor - How To Do It ?? [200]
posted by  someone claiming to be lummer57  on Thu Mar 15 11:56 CST 2007 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.