Volvo RWD Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 12/2007

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

removal of intake to change head gasket '94' 940

posted by  Steve on  Sat Apr 28 04:19 CST 2007
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 07:16 CST 2014
[RELATED]

You can pull the intake manifold slightly away from the head to remove the head. As far as the belt is concerned, merely release the tension on the TB tensioner by following FAQ instructions, then slip the belt off the cam gear. Leave the bottom end alone if you are merely working on the head.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New removal of intake to change head gasket '94' 940
posted by  troubles subscriber  on Fri Apr 27 18:04 CST 2007 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.