Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 7/2014 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Pipe from water pump to heater hose 200

posted by  walrus3 on  Wed May 9 03:09 CST 2007
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Dec 2 14:20 CST 2013
[RELATED]

My local auto parts store that also makes hydraulic hoses has the capability
to duplicate this pipe (benders, flangers, etc) of somewhat heavier tubing.
(I'm still waiting for them to braze the ear on the pipe they are making for me.)

BTW the steel tube is electropositive to the aluminum so the aluminum would
corrode preferentially, protecting the steel.

Remember how the old (mid-30s) Ford V8 engines with aluminum heads did around
the head studs? They finally came up with a tubular cutter to go around the
steel headbolts and remove the impacted aluminum corrosion product.
--
George Downs Bartlesville, Heart of the USA!






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New ANSWERED Pipe from water pump to heater hose [200]
posted by  rusteebrick  on Tue May 8 16:58 CST 2007 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.