Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 5/2006 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Oil in intake on 240, non-turbo 200 1987

uid 12839's pic
posted by  Paul Driver of Inga on  Tue Sep 25 07:43 CST 2007
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Mar 25 16:42 CST 2012
[RELATED]

One more BB learned tip on that cracked elbow for you to check out.

If that cracked elbow on the manifold goes to a hose that goes under the engine (hose was off white in color on my 86) and then runs to a vacuum fitting on the ECU near the windshield washer reservoir, you can boot that line off at both ends with zero ill effects. It is known as something like the Chrysler Ignition modification. You will want to get a good tight seal off on each end.

Supposed to help with emissions if you have to get any of those tests done and gets rid of another possible vacuum leak.

Dang the folks on this BB are good.

Regards,

PT





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Oil in intake on 240, non-turbo [200][1987]
posted by  Uncle Olaf  on Mon Sep 24 21:35 CST 2007 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.