Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 1/2006 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

How to disassemble driveshaft on 1984 245? 200 1984

posted by  someone claiming to be nate on  Tue Oct 9 04:54 CST 2007 [RELATED]

Just a few additions:

1. You should be able to get away with just removing the front (tranny end) of the driveshaft.

2. The bearing comes in two sizes...it is almost always the larger size that you need.

3. If you decide to replace U-Joints, you should know that there are at least three different sizes. Try to get a measurement before ordering (not after, like I had to a few weeks ago).






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New How to disassemble driveshaft on 1984 245? [200][1984]
posted by  Mike_84_245  on Tue Oct 9 02:47 CST 2007 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.