Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 1/2015 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Rear diff pinion bearing 200 1992

posted by  rusteebrick on  Thu Oct 11 16:02 CST 2007
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Aug 20 10:24 CST 2014
[RELATED]

Sounds like you know what you're getting into. Here's a link to Randy's Ring and Pinion. When I was considering redoing my differential I got a lot of good information from them. Lots of good how-to stuff you can download at that site.

At one time I spoke to them on the phone and they reassured me that to remove the Dana 30 from the 1031, I would not need the case spreader.

http://www.ringpinion.com/HowTo.aspx

I ultimately decided to swap one in from the boneyard and change the final ratio, and I've been happy with the change. When I was searching for the boneyard rear end, I was lucky to find one that had so sign of pinion seal leak.

Good luck with it!






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Rear diff pinion bearing [200][1992]
posted by  Jorrell  on Thu Oct 11 13:00 CST 2007 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.