Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 2/2003 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Bulb Failure Sensor affects Low Beams ONLY... 200 1989

uid 18083's pic
posted by  lucid on  Wed Oct 24 10:23 CST 2007
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 12:31 CST 2014
[RELATED]

...and you said elsewhere that the High Beams didn't flash or anything. I think that rules out the main relay inside, because the High Beam flash voltage comes direct from the battery, and the stalk switch just makes a ground to energize the flasher if the voltage is there.

Try reseating the 2 connectors on the Hi/Lo flasher relay on the left fender rail a couple of times.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New ANSWERED Boom Boom! Out go the lights! [200][1989]
posted by  talandriel  on Wed Oct 24 06:28 CST 2007 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.