Volvo RWD 444-544 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 1/2013 444-544 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Gearwrench 444-544

posted by  someone claiming to be stripping 90 on  Sun Jun 8 17:01 CST 2008 [RELATED]

I must agree that gear wrench is a great tool although should not be used for breaking loose tight bolts.
The best ones have a swivel head that locks into any angle position,and also have a toggle lever to reverse direction.With a gear wrench that does not have the reversing feature one must be careful not to work oneself into a mess.
My son tried to use a 10 mm gear wrench to remove the bolts holding the clutch fan to the waterpump,the nut unscrewed rapidly to the point of trapping the wrench between the clutch and its flange,after a few minutes of trying to decide how to deal with this we decided to remove the other three nuts with a different wrench.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Gearwrench [444-544]
posted by  volvo65  on Sun Jun 8 16:10 CST 2008 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.