Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 11/2002 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

If I can hear it... 200

your fan motor bushings are asking for lubrication, which is not easy unless you are willing to drill two holes right behind the center stack.
read everything you need to know here and follow the Lubricate link from that page for instructions.
http://www.sonic.net/~zipzippy/volvo/volvo%20240%20faq.html#blowermotor

in my experience, you need a pair of long clippers with sponge soaked with oil on the end to deliver the oil to the motor bushings through the drilled holes.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New If I can hear it... [200]
posted by  pearl  on Mon Sep 29 07:24 CST 2008 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.