Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 6/2006 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Bad Exhaust Gasket at Converter-Downpipe Junction 200

posted by  pageda on  Mon Sep 29 11:19 CST 2008
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 13:18 CST 2014
[RELATED]

If it is just the gasket replace it and get new nuts and bolts. You will probably twist off the nut and break the bolt in the process. You may need to drill out the old bolts if they are pressed into the flange. When I did this I just removed the entire exhaust system, much easier than trying to drill under the car. Dan






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Bad Exhaust Gasket at Converter-Downpipe Junction [200]
posted by  schwied  on Mon Sep 29 11:10 CST 2008 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.