Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 7/2005 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Wheel bearing replacement 200 1993

posted by  rstarkie on  Wed Jan 21 00:38 CST 2009
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 10:14 CST 2014
[RELATED]

The outer bearing can be removed without removing anything else but the cap, nut and washer.

But if you have determined that the outer bearing is in need of replacement the cup it turns in should be replaced as well. If the bearing is bad the cup is bad, or at least bad enough you don't want to install a new bearing on it.

Removing the cup does involve removing the caliper and then the hub to drive the old cup out and the new cup in.

Randy





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Wheel bearing replacement [200][1993]
posted by  Jac912  on Wed Jan 21 00:03 CST 2009 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.