Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 4/2006 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Leaking brake failure switch fix...maybe 200



The actual leak is in one of the seals between the two brake circuits internal to the junction box... the plastic switch itself isn't designed to hold pressure.

Your only safe course of action is to replace the junction box.

-Ryan

--

Athens, Ohio
1987 245 DL 314k, Dog-mobile
1990 245 DL 134k M47, E-codes, GT Sway Bars
1991 745 GL 300k, Regina, 23/21mm Turbo Sway Bars






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Leaking brake failure switch fix...maybe [200]
posted by  thecbdb  on Sun Mar 1 11:23 CST 2009 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.