Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 11/2002 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

1985 245 Engine wiring harness 200 1985

uid 27's pic
posted by  Art Benstein on  Tue Mar 10 08:49 CST 2009
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 17 20:10 CST 2014
[RELATED]

Hi Howard,

I think the back of the connector has a short plastic post with a T-head that locks into the slotted hole in the clip. The bottom of the clip locks to the connector, and the top hangs from the lip of the firewall.

Maybe it would be helpful to see what the clip looks like:







The pic you saw with the harness rot under the manifold inside the sheathing I repaired by replacing the wires affected. Some were disintegrating while others were supple and fresh looking. That was an 84.
--
Art Benstein near Baltimore

Experience is something you don't get until just after you need it.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 1985 245 Engine wiring harness [200][1985]
posted by  htnelson  on Tue Mar 10 06:28 CST 2009 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.