Volvo RWD 140-160 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 2/2017 140-160 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Heater Hose placement 140-160

uid 5322's pic
posted by  alschnertz on  Wed Mar 25 01:09 CST 2009
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 10:32 CST 2014
[RELATED]

I don't have a photo handy, but...

The hose that connects to the water pump tube goes through the upper firewall hole and connects to the upper heater core fitting;

The hose that connects to the back of the head goes to the rear heater control valve fitting;

The hose that connects to the front of the heater control valve goes through the lower firewall hole and connects to the lower heater core fitting.

Don't use plain "heater hose". There are very tight bends that will kink if you use generic "heater hose". You really should only use the hoses made specifically for that vehicle. They're pretty easy to find.
--
'60 PV544, '68 220, '70 145, '86 745T






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Heater Hose placement [140-160]
posted by  craigslist  on Tue Mar 24 14:21 CST 2009 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.