Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 3/2009 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

scratched intermediate shaft 700

posted by  shrike on  Tue Mar 24 23:29 CST 2009
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Oct 28 11:21 CST 2009
[RELATED]

So I was changing the timing belt and seals and I scratched the intermediate shaft. The cover for that shaft and the crank was hard to remove because the lower guide pin was seized and I had to use some unorthodox methods to remove it.
The scratch isn't big, I can barely feel it with my fingernail. I did sand the area a bit with 320 emery cloth to get rid of the burr but what is the best method to completely remove it?
Go all around the shaft with 320 or 600 emery cloth?
Thanks






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New scratched intermediate shaft [700]
posted by  shrike  on Tue Mar 24 23:29 CST 2009 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.