Volvo RWD 120-130 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 12/2001 120-130 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

distributor 120-130

posted by  Volvo From Heck on  Tue Mar 31 13:51 CST 2009
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Oct 13 20:56 CST 2014
[RELATED]

I just did this job today on my cousins '68 Porsche 912. His distributor had to much end play--up and down--so I popped it out and found it was missing the shim and fiber washer at the bottom--used the bits from a B20 distributor to get it right. The pin is a press fit through the distributor shaft--be sure to record the drive offset relative to the rotor mount so you don't have the drive flipped after reassembly. Support the drive on a solid surface (with a place for the pin to go) and drive the pin out with a pin punch.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New distributor [120-130]
posted by  rikpowers  on Tue Mar 31 13:00 CST 2009 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.