Start at the rear driver side, rear passenger, front driver, front passenger.
Never mind the two bleeder valves at the rear calipers, use the top one for bleeding. perhaps is a type of caliper also used in other cars mounted to the rear of the wheel.
Have someone helping you. Fill the reservoir. put a clear hose on the beading valve and into a container. Then, as the other person pushes on the brake pedal you open the bleeder valve. When the helper riches the floor you close the valve and the helper return the pedal up. You know. You say "down" and open the valve. Close the valve and say "up". Repeat the process until you see the lither color new fluid and no bubbles are present. Check the reservoir often and refill as the fluid goes down. Prevent the fluid going too low and get air in the master cylinder. Move to the next caliper.