|
Not familiar with the Volvo Setup. Not sure if the Bearing is pressed on the Axle OR in the Axle Housing. either way the job isn't too tough. I've done both.
If left unchanged, the 'play' in the Bearing will play havoc with the outter seal and you will get Gear oil leaking out that side of the axle housing.
--
'75 Jeep CJ5 345Hp ChevyPwrd, two motorcycles, '85 Pickup: The '89 Volvo is the newest vehicle I own. it wasn't Volvos safety , it was Longevity that sold me http://home.no.net/ebrox/Tony's%20cars.htm
|