Volvo RWD 120-130 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 12/2004 120-130 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

3 Bolt SU air filters 120-130

posted by  red92s on  Thu Dec 3 16:41 CST 2009
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Aug 18 13:02 CST 2014
[RELATED]

Copy and paste for a picture (they are admittedly the only nice looking part of the engine bay):

http://lh3.ggpht.com/_8ipvB_cNrbc/SsvbyMxT6cI/AAAAAAAACfI/fOSjTAoAdlc/s512/100_3645.JPG

The nuts on the top plate attach to studs, not bolts. The studs are tack welded to the bottom plate (they don't thread into the carb body, they are part of the filter). The bottom plate also has the properly located holes for bolting the carb body. Can't remember if it has two holes or three, but they should bolt up just fine to 2 or 3 bolt carb bodies.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 3 Bolt SU air filters [120-130]
posted by  mcfly subscriber  on Tue Dec 1 15:12 CST 2009 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.