I went out to PnP and found a head off a 93 that fit and changed it over. It took me about twelve hours or so- includes removing the head from the one car and cleanig it up changing the seals etc. the valves are like noew. the car ran lean, as there wasn't much in the way of carbon deposits on the valves.

I had to remove the head form the existing car (940) and clean it up- the water pump needed changing to as I found some damage to the inside. I replaced three of the injectors, I don't think they had been changed or serviced ever! The manifold on the exisitng car had two bolts that were stripped bu I didn't notice until i removed it fron the engine.

Cleaned the distributor but left the old timing belt on- it hasn't had many miles on it- I'll change it later-