Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 11/2011 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

fan belt replacement '89t wagon 700 1989

posted by  spasske on  Mon Feb 8 04:27 CST 2010
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Oct 23 10:11 CST 2014
[RELATED]

The compressor has a 10mm tensioner (slack) bolt on the side. The bolt on the front of the tensioner bolt must be loosened so it could turn. The compressor has a second bolt accessible from the back side which must also be loosened to allow it to pivot.

The setup is similiar to the alternator which is more visible, to give you an idea, except the alternator does not have the second bolt on the backside. None of the bolts inside rubber bushings should be loosened.

see http://www.brickboard.com/FAQ/700-900/EngineSealsBeltsVent.htm#AccessoryBeltTighteningandMaintenance
--
Paul NW Indiana '89 744 Turbo 145K/ '90 745 turbo 127K






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New fan belt replacement '89t wagon [700][1989]
posted by  martitee  on Sat Feb 6 14:27 CST 2010 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.