Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 11/2000 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

floor board wire way cover 200 1989

posted by  Brendy on  Mon Apr 26 03:52 CST 2010
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Oct 24 10:27 CST 2011
[RELATED]

The bent lip goes next to the rocker panel; it prevents the sheet from rocking around and keeps weight off the wiring. The back edge tucks beneath the seat trestle, and there's a small dimple in the floor pan at the upper right to prevent fore-and-aft slippage.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New floor board wire way cover [200][1989]
posted by  ACVOLVO subscriber  on Sat Apr 24 13:08 CST 2010 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.