Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 6/2005 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

DIY exhaust kit job? 200 1991

posted by  dinomartino on  Fri Jul 16 14:24 CST 2010
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 04:43 CST 2014
[RELATED]

For installation, you will be fine with sockets, wrenches, and a screwdriver to help slip on the stretchy hangers for the front muffler. I'm assuming you have two jack stands to safely support the car up off the ground.

A friend to help with positioning and suspending the components is really nice. This is a miserable job by yourself. I have done 4 exhaust systems in the past year: 2 240's, 1 940, and one BMW E24. I had help for only 1 of them, so it can be done. If a friend is impossible, creative use of jacks (even the spare-tire scissor jack!) can make things somewhat easier.

Removing the old system is actually the most unpleasant part of the job. A Sawz-All (reciprocating saw) and 2 or 3 good metal-cutting blades will significantly reduce your misery. Just pay attention to what else is nearby (brake lines, gas lines, gas tank) when you start cutting!

John






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New DIY exhaust kit job? [200][1991]
posted by  rmr2122  on Fri Jul 16 13:39 CST 2010 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.