Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 3/2016 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

¿What Is Downside to Heat Stove Removal? 200

posted by  david hunter on  Thu Jul 22 16:42 CST 2010
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Jun 30 22:10 CST 2014
[RELATED]

The sole purpose of the stove, associated tube and thermostat valve in the air cleaner is to reduce emissions during early warm up. This is from a Bosche manual on fuel injection. It has nothing to do with icing, faster warmup or all the other fanciful notions such as easier warm starting on cold days (yes I read that here). It has no effect at all after warm up. As stated if you remove something that is emissions related you have a slight chance of a sharp inspector with nothing to do catching it. Why not just lock the valve closed as many Brickseters do and leave everything in place. That way the emissions police would really have to be bored in order to know. How much room to you really need under the hood?
--
David Hunter






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New ¿What Is Downside to Heat Stove Removal? [200]
posted by  RicoS  on Thu Jul 22 03:30 CST 2010 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.