Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 7/2009 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

TAB reinstall - how to align arm and axle for bolt? 200 1989

posted by  dinomartino on  Sat Aug 21 04:37 CST 2010
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 04:43 CST 2014
[RELATED]

Dan & chup:

thanks for your guidance! I eventually found that jacking from below, even with angled pieces of wood on the front of the diff housing, was just not doing the job. So I whipped out the scissors jack from the spare tire well, grabbed a piece of 2x4 scrap to protect the body, and used the jack to ease the end of the axle back into position. Like so:



Easy as pie. Now on to the other side, which cannot possibly take as long as the first one has.

John






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 1 TAB reinstall - how to align arm and axle for bolt? [200][1989]
posted by  dinomartino subscriber  on Sat Aug 21 03:04 CST 2010 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.