Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 1/2005 200 INDEX

[<<] [>>]

VIEW

REPLY TO THIS MESSAGE

SAVE

There is a "switch' kit, but that isn't your problem .... 200 1986

posted by Art Benstein on Wed Jan 19 11:42 CST 2011
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS]

[IGNORE ALL POSTS]

last visit: Fri Oct 17 20:10 CST 2014

[RELATED]

The switch part you can replace actually cannot fail in the mode to give a false warning light, so cleaning up the old switch and the hole it gozinta has the same effect as replacing one with a $36 kit. It is just a contact -- the objective being the conductive surface of the shuttle.

Replacing the O-rings might just be an exercise in futility because the bore to which they seal is likely to be rusted steel by now.

--
Art Benstein near Baltimore

By the time a man is wise enough to watch his step, he's too old to go anywhere.

THREADED

THREADED EXPANDED

FLAT

PRINT ALL

MESSAGES IN THIS THREAD

86 Brake Line Junction leak [200][1986]
posted by Paul Driver of Inga on Sun Jan 16 15:08 CST 2011 >

86 Brake Line Junction leak [200][1986]
posted by pageda on Sun Jan 16 15:45 CST 2011 > V
- 86 Brake Line Junction leak [200][1986]
  posted by jwalker on Mon Jan 17 19:14 CST 2011 > V

86 Brake Line Junction leak [200][1986]
posted by B.C. subscriber on Tue Jan 18 18:45 CST 2011 > V

86 Brake Line Junction leak [200][1986]
posted by Art Benstein subscriber on Wed Jan 19 08:36 CST 2011 > V
- 86 Brake Line Junction leak [200][1986]
  posted by Paul Driver of Inga on Wed Jan 19 12:15 CST 2011 > V
  - 86 Brake Line Junction leak [200][1986]
    posted by Art Benstein subscriber on Wed Jan 19 13:11 CST 2011 > V
    - 86 Brake Line Junction leak [200][1986]
      posted by Paul Driver of Inga on Wed Jan 19 21:27 CST 2011 > V
      - 86 Brake Line Junction leak [200][1986]
        posted by Art Benstein subscriber on Wed Jan 19 21:57 CST 2011 > V

There is a "switch' kit, but that isn't your problem .... [200][1986]
posted by Ken C subscriber on Wed Jan 19 10:40 CST 2011 > V
- There is a "switch' kit, but that isn't your problem .... [200][1986]
  posted by Art Benstein subscriber on Wed Jan 19 11:42 CST 2011 > V
  - We may be disagreeing here .... [200][1986]
    posted by Ken C subscriber on Wed Jan 19 18:58 CST 2011 > V
    - Discussion helps us learn [200][1986]
      posted by Art Benstein subscriber on Wed Jan 19 21:16 CST 2011 > V
      - Mine was full of corrosion .... [200][1986]
        posted by Ken C subscriber on Wed Jan 19 22:28 CST 2011 > V
        
        Mine was full of corrosion .... [200][1986]
        posted by Art Benstein subscriber on Thu Jan 20 06:50 CST 2011 > V
        
        Mine was full of corrosion .... [200][1986]
        posted by Ken C subscriber on Thu Jan 20 09:13 CST 2011 > V
        
        Mine was full of corrosion .... [200][1986]
        posted by Art Benstein subscriber on Thu Jan 20 10:43 CST 2011 > V
        
        Drip loops are good :-) .... [200][1986]
        posted by Ken C subscriber on Thu Jan 20 11:27 CST 2011 > V

<< < > >>

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.

Volvo RWD/200 Forum Index

Community Forums:

RWD

AWD

GATHERINGS

OPINIONS

PICKNPULL

V8

STORIES

Classifieds

Site Features

RWD Series/Models

AWD Series/Models

Volvo RWD 200 Forum

There is a "switch' kit, but that isn't your problem .... 200 1986