Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 7/2004 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

ANSWER altenator 200 1990

posted by  Volvo From Heck on  Tue Feb 1 13:19 CST 2011
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Oct 13 20:56 CST 2014
[RELATED]

First question first--the oil seal could get damaged on installation or have been installed incorrectly--the metal on which it rides could be worn/scored--it may not have been the source (or only source) of a leak (see question 2). Second question--the wire is probably for the oil pressure light switch located behind the alternator. Is your dash lamp working properly? The oil switch can leak--and is in the general area of the front of the motor. -- Dave

This post has been marked as an answer to the original question.

THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New ANSWERED altenator [200][1990]
posted by  susan1  on Tue Feb 1 12:53 CST 2011 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.