Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 2/2010 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Oil Temp Sender 200 1988

posted by  AOG on  Fri Mar 11 17:27 CST 2011
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Feb 2 13:09 CST 2014
[RELATED]

I was worried about having the same problem while planning to add oil press and temp gauges to my 245. I ordered these from eGauges, and I'm very satisfied with the result:

part # CON-021 Screw-on oil filter sender adapter ($36). This was the perfect clean solution to allow me to tap off oil press and temp senders (with room for 2 more taps) while also keeping my dummy lite pressure switch in place. The alternative would have been an un-reliable network of tees and tap-ins that I didn't want. When it comes to oil, I don't want to mess around and create a potential loss of pressure or a fire, so $36 was cheap insurance against that.

I also used these parts and can attest to them working great together:
350-104 - VDO oil press gauge 0-80psi
360-003 - 1/8" NPT VDO oil press sender
310-106 - VDO oil temp gauge
323-057 - 1/8" NPT VDO oil temp sender

Anyway, that's my recommendation.

Steve






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Oil Temp Sender [200][1988]
posted by  moonsouljah  on Fri Mar 11 11:56 CST 2011 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.