Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 7/2014 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Fuel pumps, fuel lines, and leaks. HELP 200 1986

posted by  jgreenwood on  Fri May 20 18:16 CST 2011
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Sep 11 19:10 CST 2011
[RELATED]

Having a heck of a time installing a new main pump and filter on my friend's '86 245. It is a Michigan car an rust is everywhere. The bolts and brackets for the mounting are all rusted out and breaking. Solvable. BUT, even with a new fuel feed line from the pump to the filter and a new check valve and new copper washers I am still getting leaks. Tightening and re-tightening. The guys at CARQUEST recommended using Teflon tape just like for water plumbing. I was surprised. They said it will not degrade with gas and works fine. Is this right? I haven't tried it yet. BTW, those new fuel feed lines are pricey. Whooee.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 1 Fuel pumps, fuel lines, and leaks. HELP [200][1986]
posted by  jgreenwood subscriber  on Fri May 20 18:16 CST 2011 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.