Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 7/2016 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Replacing FPR 200 1985

posted by  Dukester on  Sat Jun 4 13:57 CST 2011
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 06:55 CST 2014
[RELATED]

Am replacing the 26 year old FPR and need to relieve the fuel line pressure. I read the clean way is to pull the pump fuses (#4 and #6) and run the engine until it dies. I pulled both fuses and ran the engine for a good 15 minutes and began to wonder when is it going to die. I felt the main fuel pump and it seemed to be running based on the slight vibration and humming!

Anybody have input on this? Should I just use a rag to catch the gas as I disconnect the FPR from the line?

Thanks as always.
Dukester






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 1 Replacing FPR [200][1985]
posted by  Dukester subscriber  on Sat Jun 4 13:57 CST 2011 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.