Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 4/2004 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

regarding pressure of fuel delivery to fuel distribution rack on top of intake manifold 700 1991

posted by  tanuki64050 on  Sun Oct 2 16:42 CST 2011
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Oct 11 17:46 CST 2011
[RELATED]

Should be about 40 psi in the rail, as set by the regulator at the front of the rail. Non-turbos are about 30 something.

I have two turbos and a gauge with fittings. I've been sold non-turbo regulators as being for turbos. If you buy, make sure it is for a turbo.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New regarding pressure of fuel delivery to fuel distribution rack on top of intake manifold [700][1991]
posted by  Bill Leland  on Sun Oct 2 11:01 CST 2011 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.