Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 12/2011 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Driver Side Door Panel for 242 200 1980

posted by  yellowbrickroadster on  Mon Dec 19 07:37 CST 2011
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Oct 22 06:18 CST 2014
[RELATED]

I had my 1980 242 door panels repaired/recovered by the interior trim guy at a local hot rod shop. He cut off the lower part of the panel and attached a new piece of a hard, waterproof cardboard-like material that is commonly used for door panels. Then, fabricated new vinyl covering and cemented that on. Not cheap, about $500 per panel, but was able to do a custom design. Check out your local hot rod shops and go in and talk to them. This is the type of work that you really should have done locally so you can let them have the panels and/or the car to make sure they fit them properly.

Mike






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New ANSWERED Driver Side Door Panel for 242 [200][1982]
posted by  orng1800es subscriber  on Sat Dec 17 20:12 CST 2011 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.