Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 2/2008 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Valve shim adjustment question 200 1980

posted by  jerryc on  Sat Sep 1 14:36 CST 2012
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Oct 8 21:28 CST 2014
[RELATED]

Are you going to use hundredths of mm, or thousandths of an inch? Stay with one and don't confuse them. Use feelers in thou and measure shims with .001" caliper, or the other way. Trying to use both and convert can lead to disaster.

In any case, yes if they cut a lot off the seats, the valves now sit deeper and throw the rest off significantly.
Easy fix; grind tip of valves to compensate. All you need to do is disassemble the motor again. Which, the shop might have avoided if they'd thought of it, which, it seems many just do not do any more.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 2 Valve shim adjustment question [200][1980]
posted by  drj434343 subscriber  on Sat Sep 1 13:20 CST 2012 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.