Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 8/2003 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

timing belt questions 700 1988

posted by  Volvo From Heck on  Thu Oct 18 12:22 CST 2012
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Oct 13 20:56 CST 2014
[RELATED]

Putting the cam timing mark on the top sets the cam for TDC compression stroke for #1 cylinder--so that's the cylinder you can use for the rope trick (you can see the lobes pointing up if you remove the oil cap). You may have stripped teeth on the belt accounting for the lack of the cam moving. You'd best figure on replacing the seals for the crank, auxiliary shaft and the cam to take care of the oil--also check the valve cover gasket. -- Dave






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New timing belt questions [700][1988]
posted by  MarkyMark  on Thu Oct 18 12:07 CST 2012 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.